Troubleshooting
5.4
If [MACHINE] tab blinks in orange
If any trouble occurs in the machine, one of the following messages will be displayed in the message area
and the [MACHINE] tab will blink in orange.
-
Paper Misfeed: "Mishandled paper"
-
Tray Empty: "Please load ## paper"
With the above message, the [Detail Check] key will be displayed on the Machine Status Screen.
%
Touch [Detail Check], and follow the instruction on the screen.
Paper misfeed
If a paper misfeed occurs with the print/scan job in progress while you are setting a reserve job, the machine
stops operation and the [MACHINE] tab may blink in orange.
If the Jam Position Screen is displayed after touching [Detail Check], follow the procedure on page 5-7 to
remove mishandled paper.
Tray empty
If the popup screen shown below is displayed after touching [Detail Check], the selected tray has become
empty.
Follow the procedure below to change the tray selection for the current job, or supply the empty tray with
copy paper.
CS665 Pro
5
5-9