Collate/Uncollate Output To The Secondary (Sub) Tray - Oce CS665 Pro User Manual

12
12.3.3

Collate/uncollate output to the secondary (sub) tray

A machine with Finisher FS-521 installed is set to output non-sorted sets to the primary (main) tray by default,
regardless of whether or not to be equipped with other optional devices. Change the output tray and select
the desired output mode by following the procedure below.
!
Detail
For detailed specifications, see page 3-3 and page 7-6.
1
Position the original.
2
Touch [Output Appli.] on the Copy Screen.
The Output Application Screen will be displayed.
3
Select the secondary (sub) tray as the output tray.
– Touch [Output Tray] to display the Output Tray Selection Screen.
– Touch the tray position key
12-12
of the secondary (sub) tray to highlight it, then touch [OK].
Output applications
CS665 Pro