Table of Contents
Advertisement
Figure 9.25
• Press 12 or 13 (Figure 9.18) to confirm the
value entered and return to the list of pa-
rameters (Figure 9.24).
• Press button 13 and hold until the LCD
display shows the code A54, indicating
entry into "parameter A54" (Figure 9.26).
Figure 9.26
• By using buttons 15 or 16 (Figure 9.18) it
is possible to modify the value of parame-
ter A54 (Figure 9.27).
3.0 = 24 kW
3.7 = 28 kW
4.0 = 32 kW
Figure 9.27
• Press 12 or 13 (Figure 9.18) to confirm the
value entered and return to the list of pa-
rameters (Figure 9.26).
• Press the 17 button (Figure 9.18) to exit
"programming mode".
MAINTENANCE
RESET
bar
RESET
bar
RESET
bar
- 61 -
Advertisement
Table of Contents
