Boot Run Procedure - Mitsubishi MELSEC QS Series User Manual

11
PROCEDURE FOR WRITING PROGRAM TO CPU
MODULE

11.3 Boot run procedure

This section explains a boot run procedure.
In the following procedure,
indicates that on the CPU module side.
11
- 4 11.3 Boot run procedure
indicates the operation on the GX Developer side, and
Section 11.2
Start (Continued from Section 11.1.3)
When the RUN/STOP/RESET switch is
in the RUN position, set the switch to
the STOP position.
In the boot file setting of the PLC
parameter dialog box, specify "Execute
boot from standard ROM".
Choose [Online] [Write to PLC] on GX
Deveoper, and write the parameters and
program to the program memory.
Choose [Online] [Write to PLC (Flash
ROM) [Write the program memory to
ROM...] on GX Developer, and write the
program memory data to the standard
ROM.
Switch the PLC power OFF&drarroON or
end the CPU module reset.
NO
Has the special relay
(SM660) turned ON?
YES
End
Diagram 11.2 Boot run flowchart
Section 5.1.4
GX Developer Operating Manual