Procedure For Writing Program - Mitsubishi MELSEC QS Series User Manual

11
PROCEDURE FOR WRITING PROGRAM TO CPU
MODULE

11.2 Procedure for writing program

This section explains the procedure for writing the parameters and program created by GX
Developer to the CPU module.
This section explains the procedure for writing a program to the program memory (
Section 5.1.2).
When storing a program in standard ROM and booting in TEST MODE, execute the
procedure in 11.3 after executing the procedure in this item.
Procedural steps shown in
shown in
11
- 2 11.2 Procedure for writing program
boxes are performed in the CPU module.
Start
Start GX Developer.
Set the project.
Do you
NO
change the number
of device points
used?
YES
Change the number of device points in
device setting of PLC parameter.
Create a program to be executed in the
CPU module.
1)
boxes are performed at the GX Developer, and those
GX Developer Operating Manual
Section 9.2
Section 9.2
Ladder (write) screen
............