Mitsubishi MELSEC QS Series User Manual page 125

Hide thumbs Also See for MELSEC QS Series:
Table of Contents

Advertisement

6
FUNCTIONS
(3) Operation switching from STOP status to RUN status
(a) Output (Y) status prior to STOP is output (Default)
(b) Output is cleared
After the output (Y) status before the STOP status is output, the sequence
program calculations are performed.
The output becomes OFF status.
The output (Y) is output after the operation of sequence program.
Refer to (5) for the operation when performing forced ON of output(Y) at STOP
status.
STOP status
RUN status
Is "Previous state" set?
YES (Set "Previous state". (default))
Output the output (Y) status right
before changing to STOP status.
Execute the sequence
program calculations.
Diagram 6.21 Processing when Change from STOP Status to RUN Status
6.10 Setting of Output (Y) Status when Changing between STOP and RUN
NO (Set "Recalculate".)
Clear the output (Y) status.
1
2
3
4
5
6
7
8
6
- 43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melsec qs001cpu

Table of Contents