Mitsubishi MELSEC QS Series User Manual page 172

9
DEVICE EXPLANATION
9
- 6 9.2 Internal User Devices
9.2.1 Input (X)
POINT
1. When debugging a program, an input (X) can be turned ON/OFF by the
following methods.
• GX Developer test operation
• OUT Xn instruction
2. Input (X) can also be used as following devices:
• Destination device (on the CPU module side) of CC-Link Safety remote
input (RX) refresh
• Destination device (on the CPU module side) of CC-Link IE controller
network or MELSECNET/H refresh
ON/OFF command
Diagram 9.5 Input(X) ON/OFF by the OUT Xn instruction
OUTX100
X100