Mitsubishi MELSEC QS Series User Manual page 30

1
OVERVIEW
(5) USB interface is equipped
(6) Connectable with personal computers and standard programmable
1
- 6 1.1 Features
The CPU module is equipped with the USB interface to communicate with a
programming tool.
Figure 1.3 Connection to a personal computer using USB
*1
controllers
The CPU module can read data from the MELSOFT products installed in the personal
computer and also can communicate data between safety programmable controller
and standard programmable controller using dedicated instructions via CC-Link IE
controller network, MELSECNET/H, and/or Ethernet
Besides, the data of ladder monitor, device monitor, and operation/error history in the
safety programmable controller can be read using GOT.
Figure 1.4 Connection with personal computer and standard programmable controller
* 1: For an access range from GX Developer and a GOT to a safety CPU module, refer to Appendix 8.
* 2: An access to the CPU module can be restricted by using the remote password function.
USB
Personal computer
*2
.
Personal computer