Table of Contents
Advertisement
Commissioning the heating system
Commissioning with the "commissioning assistant"
The commissioning assistant automatically guides you
through all the menus where settings have to be made.
Note
The following buttons may also be pressed during the
commissioning sequence:
ä To go back one step
å To display the commissioning menu structure
If å is pressed during the commissioning
sequence, the current commissioning sequence
is terminated and will have to be restarted.
Turn on the ON/OFF switch. Start the commissioning assistant.
Turn on the ON/OFF switch on the control unit.
■
For initial start-up, the commissioning assistant
appears automatically.
■
The commissioning assistant can also be started
manually:
Boiler not in operation
–
Control unit start-up
–
Press
and
simultaneously for approx.
–
Ù
Ú
5 seconds.
■
When the unit is first commissioned, the display is in
German.
Sprache
Deutsch
Bulgarski
Cesky
Dansk
Wählen mit
Fig. 36
■
Manually switching some appliance components dur-
ing commissioning enables the control unit to display
messages. These messages are not appliance
faults.
Commissioning sequence overview
Depending on the setting, other displays will be availa-
ble.
The following menu items may appear in sequence:
Select language
■
Enter ID number (optional)
■
Confirm boiler type (optional)
■
■
Selecting the fuel
■
Load standard setting
■
Set the date
■
Set time
Commissioning, inspection, maintenance
!
Please note
An operating error at the "coding levels" may
result in damage to the boiler and the heating
system.
Follow the instructions in chapter "Codes".
DE
ê
ç
BG
ê
CZ
ê
DK
ê
(
■
Select cascade and boiler number:
–
Select cascade charging
■
Configure supply system/charging scheme
For charging scheme with changeover unit:
Select changeover unit/number of wands
–
Select shut-off gate valve
■
Select extinguishing water tank
■
■
Select silo sensor fill level, fuel store
■
Set flue gas filter
■
External digital input
■
External analogue input
47
Advertisement
Table of Contents
