Table of Contents
Advertisement
7. Water collector
The water collector equipped collects the water in the compressed air.
8. Water release valve
Push the water release valve up to release the water collected in the filter bowl. Use the wrench supplied with
the system package to release the filter bowl for cleaning or filter replacement.
CAUTION!
Do not remove bowl under pressure. Disconnect air line before performing this task.
5.3 LCD Display operation
WELCOME SCREEN
The welcome screen is displayed for 3 seconds while the equipment turns ON.
After the welcome screen, the model name is displayed for 3 seconds.
MAIN SCREEN
20
Figure 5.5 - Welcome screen
Figure 5.6 - Name screen according to the model
Trigger mode
Figure 5.7 - Main screen
Current
Voltage
Output air pressure
Cutting mode
0-5584
Advertisement
Table of Contents
