Installing Optional Inline Filter
An optional inline filter is recommended for improved filtering with compressed air and keeping moisture or
debris out of the torch.
NOTE!
Adjust the gas cylinder pressure between 6 and 8 bar. The internal diameter of the supply hose must be at least 6 mm.
For a secure seal, apply thread sealant to the fitting threads, according to manufacturer's instructions. Do not use Teflon tape as a
thread sealer, as small particles of the tape may break off and block the small air passages in the torch.
0-5584
D) 1/4" NPT port
C) Filter
B) Clip
A) Hose
Figure 4.3 - Connecting Inline Filter
15