ESAB HandyPlasma 35i Operating Manual page 2

These INSTRUCTIONS are for experienced operators. If you are not fully familiar
with the principles of operation and safe practices for arc welding and cutting
equipment, we urge you to read our booklet, "Precautions and Safe Practices for
Arc Welding, Cutting, and Gouging," Booklet 0-5407. Do NOT permit untrained
persons to install, operate, or maintain this equipment. Do NOT attempt to install
or operate this equipment until you have read and fully understand these instruc-
tions. If you do not fully understand these instructions, contact your supplier for
further information. Be sure to read the Safety Precautions before installing or
operating this equipment.
This equipment will perform in conformity with the description thereof contained in this manual and accompanying la-
bels and/or inserts when installed, operated, maintained and repaired in accordance with the instructions provided. This
equipment must be checked periodically. Malfunctioning or poorly maintained equipment should not be used. Parts that
are broken, missing, worn, distorted or contaminated should be replaced immediately. Should such repair or replace-
ment become necessary, the manufacturer recommends that a telephone or written request for service advice be made
to the Authorized Distributor from whom it was purchased.
This equipment or any of its parts should not be altered without the prior written approval of the manufacturer. The user
of this equipment shall have the sole responsibility for any malfunction which results from improper use, faulty mainte-
nance, damage, improper repair or alteration by anyone other than the manufacturer or a service facility designated by
the manufacturer.
Be sure this information reaches the operator.
You can get extra copies through your supplier.
USER RESPONSIBILITY
!
How To Use This Manual.
PROTECT YOURSELF AND OTHERS!
CAUTION