Daikin Aurora Series Service Manual page 87

SiUS341802E
9.4.2 With Optional Infrared Presence/Floor Sensor
Whether the thermostat is turned on or off is determined by the difference between the remote
controller set temperature and the detected temperature around people.
Normal operation
· Cooling operation
· Heating operation
Dry operation
· When Tro
· When Tro > 24.5°C (76.1°F)
∗: Description of symbols
Control range of temperature around people
When the floor temperature is very low, operation using the temperature around people may cause
the suction air temperature to operate outside of use range.
To avoid the above condition, a limit based on the suction air temperature is set for the use range of
the temperature around people.
•
•
Functions and Control
Normal operation
(Thermostat ON)
Normal operation
(Thermostat ON)
≤
24.5°C (76.1°F)
Dry operation
Dry operation
∆
T : Room temperature or temperature around people – Remote controller set temperature
Tro : Room temperature or temperature around people at the start of dry operation
Tr : Room temperature or temperature around people
Heating operation
· When the floor temperature is higher than suction air temperature (R1T), R1T will be treated
as the control target temperature in operation.
· When the temperature around people is 33°C (91.4°F) or higher, R1T will be treated as the
control temperature for operation.
Cooling operation
· When the floor temperature is lower than suction air temperature (R1T), R1T will be treated as
the control target temperature for operation.
· When the temperature around people is 15°C (59°F) or lower, R1T will be treated as the
control temperature for operation.
∆T ≤ –1.0˚C (–1.8˚F)
Thermostat OFF
∆T ≥ +1.0˚C (+1.8˚F)
∆T ≥ +1.0˚C (+1.8˚F)
Thermostat OFF
∆T ≤ –1.0˚C (–1.8˚F)
Tr < Tro – 1.0˚C (– 1.8˚F)
Thermostat OFF
Tr > Tro + 1.0˚C (+ 1.8˚F)
Tr < Tro – 1.5˚C (– 2.7˚F)
Thermostat OFF
Tr > Tro + 0.5˚C (+ 0.9˚F)
Outline of Control (Indoor Unit)
74