Language; Key Sound; Date; Warn Sound - UNI-T UTL8500 Series User Manual

5.1.1 Language

The electronic load provides two system languages (CHN/ENGLISH), which can be
changed in the system parameter settings. Select Language, turn the knob or change the
up and down direction keys to adjust to the language you need, and then press
complete the setting.

5.1.2 Key Sound

The key sound is used to set whether to sound when you operate the keyboard or the
knob. If it is on, the buzzer will emit a short sound when you press any key or rotate the
knob. If it is off, no sound will be emitted at any time when you operate the button or the
knob. The factory default key sound is on.

5.1.3 Date

It is used to set the current date of the system. The user first selects the setting option,
moves the cursor to the position to be modified by the left and right direction keys, and
then rotates the knob or directly enters the number with the keyboard to adjust the
content to be modified. Lastly, press

5.1.4 Warn Sound

The UTL8500 series electronic load has warn sound function. When the load ends or
encounters an abnormal problem during the test, the electronic load will emit a warn
sound through the built-in buzzer. When the test is successful, the load will emit two short
beeps. When the test fails or encounters other abnormalities, the load will emit two long
beeps. The warn sound is on by default. If you need to change it, select this option on the
system configuration page and adjust it.

5.1.5 Time

Time setting is the same as the date setting. It is used to set the current system time.

5.1.6 DIM Display

In order to adapt to the operating environment of different brightness, the electronic load
has a screen brightness adjustment function, which can be changed in the system
parameters. Select the option DIM Display, press
keys to adjust to the required value, and then press

5.1.7 Initial Mode

When the initial mode is selected as "Last", the state of the load each time it is powered
UTL8500 Series User Manual
to complete the modification.
, rotate the knob or use the direction
to complete the setting.
42
to the State of Factory
Settings
to