Note: Please read through the content of safety information in preface carefully before
using the load.
Warning: Please make sure that the power supply voltage is consistent with the supply
voltage before turning on the power, otherwise the instrument will be burnt out. Please
be sure to connect the main power plug to a power socket with ground protection. Do
not use a wiring board without ground protection.
3.2 Introduction of Screen Display
After entering into the test mode, the LCD screen will be divided into several areas to
display different information.
3.2.1 Display of Measurement Interface
No.
Items
1
Mode
2
Time
3
System Icon
4
Parameters
5
Set Value
6
Other Parameters
Mode Selection (Soft
7
Keyboard)
Figure 3-2 Interface of Measurement
Description of Function
Current Measurement Mode or Status
Current System Time
Display the Status of U Disk, Remote Compensation,
Short-Circuit Test and Trigger Function
Real-Time Voltage, Current and Power
Mode Setting Information, Voltage and Current Value
Real-Time Running Time, Other Processes and
Result Data
Select
the
Corresponding Functions at the Bottom of the Screen
15
UTL8500 Series User Manual
Work
Mode
and
Operate
the