How To Change Orientation Mode Presets; How To Select The Range Scale - Furuno FR-1908V-BB Operator's Manual

1.10.4

How to change orientation mode presets

Seven orientation modes are available in [SEA] mode, two orientation modes in the
[RIVER] mode. You can remove unnecessary modes from the Orientation icon as fol-
lows.
1. Right-click the orientation icon to show the [ORIENTATION MODE] window.
SEA
4
HEAD-UP
OFFCENT
STBY
Orientation icon
(at the top left corner on the screen)
2. Click the mode to set.
3. Click [ON] or [OFF]. Any mode set to [OFF] is removed from the Orientation icon.
Note: You can not set [HEAD-UP] to [OFF].
4. Click outside the menu window to close the menu.
1.11

How to Select the Range Scale

The selected range scale, range ring interval
and pulse width are shown at the top left cor-
ner on the screen. When a target of interest
comes closer, reduce the range scale so that
it appears in 50-90% of the
The available units for range are NM, KM,
SM, and KYD. You can change the unit when
installed.
Left-click the range scale icon to decrease the range: right-click to increase the range.
0.5/ 0.1
Decrease the range
ROT
RUDDER
/1 NM
A
Right-
click
HDG
OFF
M1
display radius.
Left-click
NM
Range scale selected
[ORIENTATION MODE]
1 BACK
2 HEAD-UP
OFF/ON
3 HEAD-UP TB*
OFF/ON
4 STERN-UP
OFF/ON
5 NORTH-UP*
OFF/ON
SEA
6/ 1.5 6/ 1.5
HEAD-UP
OFFCENT
Range scale
Right-click
0.75/ 0.25
NM
1. OPERATION
6 COURSE-UP*
OFF/ON
7 NORTH-UP TM*
OFF/ON
8 COURSE-UP TM*
OFF/ON
*: [SEA] mode only
ROT
RUDDER
ALARM
NM NM
ALARM
HDG 123.4°
OFF
Range ring interval
1/ 0.25
NM
Increase the range
ACK
1-15