Furuno FR-1908V-BB Operator's Manual page 68

1. OPERATION
How to edit the [CUSTOM MENU]
Note: The [CUSTOM1-1] setting is fixed as a default setting. You can edit the setting,
but when the system is turned off, the default setting are restored. To save a custom-
ized set, select a setting other than [CUSTOM1-1].
1. Right-click the [CUSTOM] icon at the bottom right corner on the screen to show
the [CUSTOM MENU] window.
REL
ON
2. Click [EDIT].
[EDIT]
1 BACK
2 USER NAME
USER NAME 1
3 USER COMMENT
CUSTOM4-4
4 [GAIN/STC/RAIN]
5 FTC
OFF/1/2
6 INT REJECT
OFF/1/2/3
7 ECHO STRETCH
OFF/1/2/3
3. Click [USER NAME] to edit.
4. To edit the name, click the name column
then enter the name with the software key-
board. Click the [END] button to finish.
• Change the digit: Rotate scroll wheel.
• Delete a character: Use the [BS] button on
the software keyboard.
5. Click [USER COMMENT] to edit.
The editing procedure is the same as that
for [USER NAME]. Refer to step 4
6. To edit the name, press the name column
then enter the name with the software keyboard. Click the [END] button to finish.
1-56
CUSTOM3-4 CUSTOM3-4
► ►
FTC 1
TRAIL IR 1
►
2.50sec
ES 2
EAV 3
00m03s
8
9
10 VIDEO CONTRAST TYPE
11 [STC CURVE]
12 LOW LEVEL ECHO
13 TT ECHO LEVEL
#15 [PULSE WIDTH (SEA)] for [SEA] mode instead of #14
Right-
[CUSTOM MENU]
click
1 BACK
2 [EDIT]
3 [PRESET]
ECHO AVERAGE
OFF/1/2/3
WIPER
OFF/ON
A/B/C/D
0
13
1
2
3
4
[END] button
1
2
3
4
14 [PULSE WIDTH (RIVER)]
16 SAVE & QUIT
[EDIT]
Name
BACK
column
USER NAME
USER NAME 1
USER COMMENT
CUSTOM4-4
[GAIN/STC/RAIN]
[EDIT]
BACK
Name
USER NAME
USER NAME 1
column
USER COMMENT
CUSTOM4-4
[GAIN/STC/RAIN]