Furuno FR-1908V-BB Operator's Manual page 61

How to create a barge mark on the screen
1. Click the barge number icon then rotate the setting knob to select the barge num-
ber (1 to 10).
2. Click the [BARGE] icon to enable creation of the barge mark. The cursor shape
changes from an arrow to a cross mark.
MENU
ON
BARGE BARGE
2 2 WHT
MARK MARK ON
CYA
BRL2-3
ECHO GRN
B IN BLK
3. Click the start point (X-axis and Y-axis) of the barge mark.
4. Select the 2nd point of the barge mark. As you drag the cursor, the width of the X-
axis and Y-axis are displayed and the barge mark is drawn with a dashed line.
1st point
X= 0ft
Y= 0ft
1st point of the barge mark
(Barge mark size:
wide(X)= 0 ft, length (Y)= 0 ft)
5. Click the 2nd point to complete the barge mark. The mark changes to a rectangle
with the solid line.
MENU
BARGE ON
2 2 WHT
MARK MARK ON
DOCK OFF
CYA
BRL2-3
ECHO GRN
B IN BLK
Click
DOCK OFF
X= 0ft
Y= 0ft
Click the 2nd point.
The arrow changes The arrow changes
to the cross mark. to the cross mark.
1st point
X= 5ft
Y= 20ft
The barge mark is completed.
(Barge mark size:
wide(X)= 5 ft, length (Y)= 20 ft)
1. OPERATION
2nd point
1-49