Echo Area; Operation Modes; How To Select An Operation Mode - Furuno FR-1908V-BB Operator's Manual

1. OPERATION
1.9

Echo Area

The echo display area can be selected for [CIRCLE] or [WIDE], in the [SEA] mode.
1. Open [MAIN MENU], click [DISPLAY].
2. Click [ECHO AREA] then select the op-
tion.
[CIRCLE]: Echoes in the radar circle.
[WIDE]: Echoes in the whole of the dis-
play
3. Click outside the menu window to close
the menu.
1.10

Operation Modes

This radar has two operating modes: river mode and sea mode.
• The river mode provides a specialized radar display for river navigation.
• The sea mode provides the traditional radar display.
1.10.1

How to select an operation mode

Click the operation mode icon at the top left corner of the screen to select [RIVER] or
[SEA].
Note 1: To enable switching of the operation mode, the [OPERATION TYPE] setting,
in the [SERVICE MENU], must be set to [RIVER-SEA]. See your dealer.
Note 2: To change the operation mode ([RIVER] or [SEA]), go to [STBY] once to se-
lect the operation mode then go to [TX] mode.
The following items are set according to the operation mode.
• Orientation mode
• Range
• Units
• Screen size (River mode: circle* only, Sea mode: circle* and wide*)
*: See section 1.9.
1-12
ROT
SEA
RUDDER
2/ 0.4
NM
Click the operation
HEAD-UP HDG
mode icon
OFFCENT OFF
S
STBY
Gray zone: Echo area
[CIRCLE] [WIDE]
RO
RIVER
RUDDE
1.6/ 0.4
SM
HEAD-UP HDG
OFFCENT OFF
S
STBY