Customized Menus - Furuno FR-1908V-BB Operator's Manual

Autopilot graph
1) Follow-up (FU) mode
When the autopilot is in the follow-up mode, the follow-up rudder command is in-
dicated on the RUDDER scale. In addition, "FOLLOW UP" is indicated at the top
of the screen. In follow-up mode, the autopilot controls the rudder so that actual
rudder angle becomes same as commanded one.
2) Autopilot (AP) mode
When the autopilot is in the "autopilot" mode and a ROT signal is available from
the autopilot, the autopilot graph shows ROT command. The actual ROT com-
mand set on the autopilot is represented by a small circle on the ROT scale. In ad-
dition, " AUTOPILOT" is indicated at the top of the screen. In "autopilot" mode,
the autopilot controls the ROT so that actual heading becomes same as com-
manded one.
3) Neither FU nor AP mode
When the autopilot is in neither FU nor AP mode, the autopilot graph shows ROT
command as default.
4) No autopilot or on standby
The autopilot graph is not shown if the signal is lost/interrupted or if there is no au-
topilot connected (includes standby mode).
1.34

Customized Menus

Up to four customized menu settings can be saved for up to four different user profiles.
In other words, you can save up to 16 sets of menu settings.
USER 1
USER 2
USER 3
USER 4
How to select the customized set
1. Click the [CUSTOM] icon at the bottom right corner on the screen to show the
[CUSTOM MENU] window.
REL
ON
2. Click the required user name.
3. Click the required menu set.
4. Click outside the menu window to close the menu.
Customized menu settings
CUSTOM3-4 CUSTOM3-4
► ►
FTC 1
TRAIL
► IR 1
2.50sec
ES 2
EAV 3
00m03s
4 sets
[CUSTOM MENU]
1 BACK
2 USER NAME 1
Click
CUSTOM1-1/
CUSTOM1-2/
CUSTOM1-3/
CUSTOM1-4
3 USER NAME 2
CUSTOM2-1/
CUSTOM2-2/
CUSTOM2-3/
CUSTOM2-4
1. OPERATION
16 sets
4 USER NAME 3
CUSTOM3-1/
CUSTOM3-2/
CUSTOM3-3/
CUSTOM3-4
5 USER NAME 4
CUSTOM4-1/
CUSTOM4-2/
CUSTOM4-3/
CUSTOM4-4
1-55