How To Sleep Targets; How To Sleep An Individual Target; How To Sleep All Targets; Ais Symbol Attributes - Furuno FR-1908V-BB Operator's Manual

3.4

How to Sleep Targets

3.4.1

How to sleep an individual target

You may "sleep" an AIS target as below when the screen becomes filled with targets,
which might prevent important radar and AIS displays from being identified. Note that
targets that have been activated automatically cannot be "slept".
1. Right-click the AIS target to sleep to show the AIS window.
2. Click [ACTIVE/SLEEP].
3.4.2

How to sleep all targets

1. Open [AIS TARGET MENU] (see step 1 of section 3.2), click [SLEEP ALL TAR-
GETS].
2. Click [YES].
3. Click outside the menu window to close the menu.
3.5

AIS Symbol Attributes

You may adjust the brilliance and select the size and color of the AIS symbol.
3.5.1

AIS symbol brilliance

1. Right-click the [BRL] (brill) icon to show the [BRILL MENU] window.
2. Click [EDIT].
3. Click [BRILL DETAIL] to show the [BRILL DETAIL] window.
1
2
3
4
5
6
4. Click [AIS SYMBOL].
5. Set the brilliance as appropriate with the setting knob.
6. Click outside the menu window to close the menu.
3.5.2

AIS symbol size and color

You may select the size and color of the AIS symbol as follows.
1. Open [MAIN MENU], click [TT
2. Click [SYMBOL].
[BRILL DETAIL]
BACK
CHARACTER 7
CURSOR 8
ECHO 9
TRAIL 10 VRM
HEADING LINE 11 TT SYMBOL
FIXED RING 12 AIS SYMBOL
GYRO RING 11 MARK/LINE
EBL
.
AIS].
3. AIS OPERATION
Active AIS Sleeping
AIS
3-5