How To Set Menu And Icon Behavior; Auto Closing Of Menu Window - Furuno FR-1908V-BB Operator's Manual

• [SAVE DATA]: Save the file stored on the following file group set at [NAME]. Set the
name with the software keyboard. Click the [END] key to complete the name setting.
[MARK/LINE]* (see the figure shown right)
[SETTING DATA]
[ALARM HISTORY]
[LOG FILE]
• [REPLAY (READ) DATA]: Select the data group in the SD card, [MARK/LINE]* or
[SETTING DATA], then select the file to replay (read).
• [DELETE DATA]: Select the data group to delete from SD card, [MARK/LINE]*,
[SETTING DATA], [ALARM HISTORY] or [LOG FILE], then select the file to delete.
• [REMOVE EXTERNAL MEDIA]: Select the SD card ([SD-1] or [SD-2]) to remove
from the card slot safely.
Note: Select the same card as the card selected on the [DRIVE SELECT] menu.
*: [RIVER] mode only
1.36

How to Set Menu and Icon Behavior

1.36.1

Auto closing of menu window

In the [SEA] mode, the menu window can be set to close automatically if there is no
menu operation within the specified period.
You can close the menu window automatically after a certain period with no operation.
Note: This function is for the [SEA] mode only.
1. Open [MAIN MENU], click [DISPLAY].
2. Click [MENU].
3. Click [AUTO-CLOSING].
Note: In the [RIVER] mode, auto closing is fixed
to [ON]. Go to step 5 to select the closing time.
4. Click the [ON] or [OFF] as applicable.
5. Click [AUTO-CLOSING TIME].
6. Click the appropriate time to close the menu window automatically among 5 sec,
10 sec and 20 sec.
7. Click outside the menu window to close the menu.
1. OPERATION
[MARK/LINE]
1 BACK
2 NAME
M0000000
[END] key
[MENU]
1 BACK
2 AUTO-CLOSING
OFF/ON
3 AUTO-CLOSING TIME
5sec/10sec/20sec
1-59