Lexmark XC8163 User Manual page 90

Understanding the printer menus
Menu item
Minimum Line Width
1–30 (2*)
Lock PS Startup Mode
Off
On*
Image Smoothing
Off*
On
Font Priority
Resident*
Flash/Disk
Wait Timeout
Off
On* (40 seconds)
Note: An asterisk (*) next to a value indicates the factory default setting.
PCL
Menu item
Font Source
Resident*
Disk
Flash
All
Font Name
Courier*
Symbol Set
10U PC‑8*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the minimum stroke width.
Notes:
•
Jobs printed in 1200 dpi use the value directly.
•
Jobs printed in 4800 CQ use half the value.
Disable the SysStart file.
Enhance the contrast and sharpness of low‑resolution images.
Note: This setting has no effect on images with a resolution of 300 dpi or
higher.
Establish the font search order.
Notes:
•
Resident sets the printer to search its memory for the requested font
before searching the flash memory or printer hard disk.
•
Flash/Disk sets the printer to search the flash memory or printer hard
disk for the requested font before searching the printer memory.
•
This menu item appears only when a flash memory or hard disk is
installed.
Enable the printer to wait for more data before canceling a print job.
Description
Choose the source which contains the default font selection.
Notes:
•
Flash and Disk appear only when a flash memory or hard disk is
installed.
•
For Flash and Disk to appear, make sure that they are not read‑ or
write‑protected.
Select a font from the specified font source.
Specify the symbol set for each font name.
Note: A symbol set is a set of alphabetic and numeric characters,
punctuation, and special symbols. Symbol sets support the different
languages or specific programs such as math symbols for scientific text.
90