Setting Up Device Quotas; Using Qr Code Generator - Lexmark XC8163 User Manual

Setting up and using the home screen applications

Setting up Device Quotas

Notes:
•
This application is supported only in some printer models. For more information, see
applications" on page
•
You may need administrative rights to access the application.
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Apps > Device Quotas > Configure.
3
In the User Accounts section, add or edit a user, and then set the user quota.
4
Apply the changes.
Note: For information on how to configure the application and its security settings, see the Device
Quotas Administrator's Guide.

Using QR Code Generator

Notes:
•
This application is supported only in some printer models. For more information, see
applications" on page
•
You may need administrative rights to access the application.
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Apps > QR Code Generator > Configure.
3
Do either of the following:
•
Select a default QR code value.
•
Type a QR code value.
4
Apply the changes.
19.
19.
21
"Supported
"Supported