Lexmark XC8163 User Manual page 84

Understanding the printer menus
Menu item
Pages per Side Orientation
Auto*
Landscape
Portrait
Pages per Side Border
None*
Solid
Copies
1–9999 (1*)
Print Area
Normal*
Fit to page
Whole Page
Note: An asterisk (*) next to a value indicates the factory default setting.
Finishing
Menu item
Staple Job
Off*
1 staple, top left corner
2 staples, left
1 staple, top right corner
2 staples, top
1 staple, bottom left corner
2 staples, bottom
1 staple, bottom right corner
2 staples, right
Staple Test
Start
Hole Punch
Off*
On
Hole Punch Mode
2 holes
3 holes
4 holes
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the orientation of multiple page images when using the Pages per Side menu.
Print a border around each page image when using the Pages per Side menu.
Specify the number of copies for each print job.
Set the printable area on a sheet of paper.
Description
Specify the staple position for all print jobs.
Note: This menu item appears only when a finisher is installed.
Determine whether the staple finisher is functioning properly.
Note: This menu item appears only when a finisher is installed.
Punch holes along the edge of the printed output.
Note: This menu item appears only when a multiposition staple, hole punch
finisher is installed.
Set the hole punch mode for the printed output.
Notes:
•
3 holes is the U.S. factory default setting. 4 holes is the international
factory default setting.
•
This menu item appears only when a multiposition staple, hole punch
finisher is installed.
84