Advertisement
2. Installation is the reverse the removal.
ROOM LAMP REPLACEMENT
1. Remove the room lamp.
a. Remove the lens (A).
b. Remove the screw.
c. Pull out the room lamp (B).
d. Disconnect the connector (C).
2. Installation is the reverse of removal.
ROOF TRIM REPLACEMENT
a. When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the
related parts, to prevent damage.
b. Put on gloves to protect your hands.
1. Remove the following item.
a. Sunvior.
b. Assist handle.
c. Side tray.
2. Using a clip remover, detach the clips, and remove the roof trim (A).
3. Installation is the reverse the removal.
a. Replace any damage clips.
Advertisement
