Advertisement
2007 > 2.7L V6 GASOLINE >
REPLACEMENT
DRIVER/ASSIST DOOR MODULE (DDM/ADM)
1. Remove (-) negative battery terminal.
2. Remove the front door trim panel. (Refer to the Body group-front door)
3. Disconnect the door module mounting screws (5EA) after disconnecting the module connectors (3EA) from the
motor.
4. Remove the door module (DDM/ADM) (A) from the front door trim panel.
5. Installation is the reverse of removal.
SLIDING POWER WINDOW SWITCH
1. Remove (-) negative battery terminal.
2. Disconnect the connector (B) after removing the sliding power window switch (A) from the B pillar trim (C).
3. Installation is the reverse of removal.
QUARTER GLASS SWITCH
Advertisement
