Advertisement
2007 > 2.7L V6 GASOLINE >
INSPECTION
POWER TAILGATE MOTOR INSPECTION
1. Check the power tailgate motor by using the diagnostic tool.
2. Select a vehicle type and "BODY CONTROL MODULE(BCM)".
3. Select the "REAR AREA MODULE"
4. Select the "ACTUATION TEST" and "PTG OPEN/CLOSE" to operate tailgate motor.
5. If there is no working in actuator, change the drive unit.
OPTICAL SENSOR INSPECTION
1. Check the power tailgate control module input/output value by using the diagnostic tool. If the operation of tailgate
control module is abnormal, replace power tailgate drive unit.
2. When checking the optical sensor, select a vehicle type and "POWER SLIDING/TAILGATE" menu.
Advertisement
