Advertisement
ON
DOOR
Door Courtesy Lamps
Key Hole Illumination
1. Working Conditions
The key cylinder is illuminated when the driver and / or the assist door are open.
2. Key hole extinguish conditions:
a. The key cylinder is turned off 10s after the driver and assist doors are closed.
b. The key cylinder is turned off immediately if the key is inserted in the hole and put to RUN or START position.
c. For vehicles equipped with BurglarAlarm, the key cylinder is turned off immediately when the system goes to
ARM WAIT mode during the 10s after the driver and assist doors are closed.
d. For vehicles not equipped with BurglarAlarm, the key cylinder is turned off immediately when RKE lock signal is
received from keyfob during the 10s after the driver and assist doors are closed (4).
3. Functional Diagram
Panel Lights, Switch Illumination
1. Working Conditions
The MF "high beam" and "flash to pass" switches do not influence the management of the Panel Lights and Trip
Computer illumination, Rear Blower illumination and Rear Monitor illumination.
2. Functional Diagram
Don't care
OPEN
CLOSE
OPEN → CLOSE
CLOSE → OPEN
OFF
ON during 20 min
then directly OFF
OFF
OFF
ON during 20 min
then directly OFF
ON
ON during 20 min
OFF
OFF
ON during 20 min
ON
OFF
Advertisement
