Advertisement
PROBLEMS AND REPLACEMENT PARTS:
Problem
All keys have been lost
Antenna coil unit does not work
PCM(ECM) does not work
Ignition switch does not work
Unidentified vehicle specific data occurs
SMARTRA unit does not work
REPLACEMENT OF PCM(ECM) AND SMARTRA
In case of an inoperative PCM(ECM), the unit has to be replaced with a "virgin" or "neutral" PCM(ECM). All keys have
to be taught to the new PCM(ECM). Keys, which are not taught to the PCM(ECM), are invalid for the new PCM(ECM)
(Refer to key teaching procedure). The vehicle specific data have to be left unchanged due to the unique
programming of transponder.
In case of an inoperative SMARTRA, there is no special procedure required. A new SMARTRA device simply replaces
the old one. There are no transponder-related data stored in this device.
Part set
Blank key (4)
Antenna coil unit
PCM(ECM)
Ignition switch with Antenna coil unit
Key, PCM(ECM)
SMARTRA unit
Scan tool required?
YES
NO
YES
YES
YES
NO
Advertisement
