Kia Carnival 2007 Workshop Manual page 1400

1. Remove (-) negative battery terminal.
2. Remove the sliding door trim panel. (Refer to the Body group-rear door)
3. Disconnect the motor connector from the motor.
4. Connect the motor terminals directly to battery voltage and check that the motor operates smoothly. Next, reverse
the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal,
replace the motor.
QUARTER GLASS MOTOR INSPECTION
1. Remove (-) negative battery terminal.
2. Remove the D pillar trim panel (A). (Refer to the Body group-interior trim)
3. Disconnect the motor connector from the motor.
4. Connect the motor terminals directly to battery voltage and check that the motor operates smoothly. Next, reverse
the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal,
replace the motor.