Advertisement
2007 > 2.7L V6 GASOLINE >
REPLACEMENT
FRONT POWER WINDOW MOTOR
1. Remove (-) negative battery terminal.
2. Remove the front door trim panel. (Refer to the Body group-front door)
3. Remove the window motor (B) after disconnecting the motor connector (A) and mounting nuts.
4. Installation is the reverse of removal.
SLIDING POWER WINDOW MOTOR
1. Remove (-) negative battery terminal.
2. Remove the sliding door trim panel. (Refer to the Body group-rear door)
3. Remove the door trim seal and glass.
4. Remove the door regulator.
5. Remove the power window motor (A) after disconnecting the motor connector and power window motor mounting
nuts.
6. Installation is the reverse of removal.
QUARTER GLASS MOTOR
1. Remove (-) negative battery terminal.
2. Remove the D pillar trim panel (A). (Refer to the Body group-interior trim)
Advertisement
