Advertisement
4. Install the spacer (A) install the windshield glass (B) temporarily with making sure to position them on the center,
and then place the alignment mark (C).
5. Remove the windshield.
6. With a sponge, apply a light coat of body primer to the original adhesive remaining around the windshield opening
flange. Let the body primer dry for at least 10 minutes.
a. Do not apply glass primer to the body, and be careful not to mix up glass and body primer sponges.
b. Never touch the primed surfaces with your hands.
c. Mask off the dashboard before painting the flange.
Advertisement
