Kia Carnival 2007 Workshop Manual page 1309

Tolerance
(rpm)
Revolution
(rpm)
FUEL GAUGE SENDER
1. Using an ohmmeter, measure the resistance between terminals 1 and 2 of sender connector (A) at each float level.
2. Also check that the resistance changes smoothly when the float is moved from "E" to "F".
If the height resistance is not within specifications, replace the fuel sender as an assembly.
After completing this test, wipe the sender dry and reinstall it in the fuel tank.
ENGINE COOLANT TEMPERATURE SENDER
1. Using an ohmmeter, measure the resistance between the terminal 2 and ground.
Temperature
[°F(°C)]
Resistance (Ω)
Temperature
[°F(°C)]
Resistance (Ω)
OIL PRESSURE SWITCH
1. Check that there is continuity between the oil press switch terminal and ground with the engine off.
2. Check that there is no continuity between the terminal and ground with the engine running.
3. If operation is not as specified, replace the switch.
5,000
±150
±150
Position
Sender (E)
Warning lamp
1/2
Sender (F)
140
(60)
128
120
(49)
209.6
6,000 7,000
±180 ±210
±150 -
185 230
(85) (110)
56.1 25.2
160 230
(71) (110)
88.7 24.3
8,000
-
-
Resistance(Ω)
200
160
54.5
8
257
(127.4)
16.1
260
(127.4)
15.9
Engine
Gasoline
Diesel
E/G
Gasoline
E/G
Diesel