Advertisement
2. Disconnect the connector (B).
3. After loose the dooring module mounting nuts, remove the window regulator (A).
4. Installation is the reverse of removal.
a. Make sure the connector is plugged in properly and each rod is connected securely.
b. Make sure the door lock and open properly.
INSIDE HANDLE REPLACEMENT
1. Disconnect the clip (A), remove the inside handle (B).
2. Installation is the reverse of removal.
a. Make sure the door lock and open properly.
CHANNEL REPLACEMENT
1. Remove the door trim.
2. Remove the glass.
3. Loosen the channel mounting nuts, remove the channel (A).
Advertisement
