Display Of Measurement Results - Bosch TTM 2104 Original Instructions Manual

8.3

Display of measurement results

The measurement results is automatically displayed
some seconds after the crossing.
i
If the
TTM 2104 / TTM 2204
ANPR camera, the registration number is displayed
in all views as an additional feature.
Standard view
No. Screen Description
element
1 Front Left Tread depth measurement result front left
tire
2 Rear Left Tread depth measurement result rear left
tire
3 Type of 1: Simple view, 2: standard view,
result 3: extended view
display Type of result display is determined in
the "Settings" menu, and can be changed
temporarily while the result is displayed.
4 Front Right Tread depth measurement result front
right tire
5 Rear Right Tread depth measurement result rear right
tire
Simple view
Robert Bosch GmbH
was delivered together with the
Software configuration | TTM 2104 / TTM 2204 | 53 | en
Extended view
1 Guiding values in brackets
i
Guiding values in brackets are displayed if the
measurement cannot be performed correctly.
Examples:
Guiding values in brackets
Tires too small
Run-over speed too high
Too much humidity on the tire
Too much humidity on the glass
plate
Direct and strong sunlight
Interpretation of measuring results
No. Description
1 Green writing or green input box and
green checkmark:
Tread depth is sufficient,
tire must not be replaced.
2 Yellow writing or yellow input box and
yellow exclamation mark:
Tread depth is still sufficient, tire should
be replaced soon.
3 Red writing or red input box and
red warning sign:
Tread depth is insufficient,
tire must be replaced.
Remedy
–
Decrease run-over speed
Dry tires
Dry glass plate
Shade the measurement bay
Icon
|
1 691 206 005 2019-02-25