Process And Test Protocol; Browser Recommendation; Smart-Tv Recommendation; Switching Off Easy Tread - Bosch TTM 2104 Original Instructions Manual

1 <Protocol>
2 Protocol views
3 <Print>
6.5.3

Process and test protocol

1. Select <Process> to display the process.
i
New measurements are automatically added to the
process display.
i
Back to the crossing mode: select <Crossing>.
2. Highlight a line in the process display and select
<Protocol> to display the protocol of the selected
crossing.
1 <Crossing>
2 <Process>
3 <Protocol>
3. Set protocol view preferences.
R
Select right button to view the overall protocol
width.
R
Select left button to view the overall protocol height.
4. Select <Print> to print the protocol.
Robert Bosch GmbH
Measurement procedure | TTM 2104 / TTM 2204 | 41 | en
1 Protocol views
2 <Print>
6.6

Browser recommendation

As a general recommendation, always use the current
browser.
Desktop, Android, iOS
R
Mozilla Firefox, version 28 or higher
R
Google Chrome version 21 or higher or current
browser with Chromium engine.
i
Recommendation when using a browser on the PC:
turn on full screen mode (F11 key in open browser).
i
This device supports only Google Chrome and
Mozilla Firefox.
Smart TV
R
Samsung TV (Tizen operating system)
i
Recommendation: to guarantee good display quality
and speed, only use current screens.
6.7

Smart-TV recommendation

i
The TTM 2104 / TTM 2204 has been tested with
Samsung smart TVs.
There may be issues with smart TVs by other
manufacturers.
6.8 Switching off TTM 2104 / TTM 2204
Switch off the power supply for the TTM 2104 / TTM 2204 at the
main switch of the electrical cabinet.
|
1 691 206 005 2019-02-25