Table of Contents
Advertisement
Available languages
Available languages
10. Entrance Check /
Connected Repair
This software function may be installed additionally.
Information is available from our customer service
representative.
i
Entrance Check is an Internet-based service for
the recording and administration of measurement
data that is collected when accepting a vehicle in a
workshop.
Connected Repair is a service for the recording
and administration of measurement data that is
collected when a vehicle is repaired or serviced.
The service can be made available locally or in a
network.
i
Download current CoRe version from:
http://cdn.esitronic.de/CoWo/core.zip
i
In order to use the services, the Tire Tread
Connector software must be installed on a Windows
PC.
10.1
PC prerequisites
R
Operating system Windows 7 or higher.
R
Entrance Check: Internet connection.
R
Connected Repair: connection to CoRe server.
R
Connection to software for diagnostics module.
10.2
Installation
1. Use the following link to download the set-up for
the "Tire Tread Connector" software from one of the
diagnostic modules:
"http://<MODULE IP ADRESS>/files/ConnectorSetup.exe"
2. Start installation by executing "ConnectorSetup.
exe".
"
Upon successful installation, the "Tire Tread Connector"
software starts and the symbol shown below is
displayed in the information panel of the task bar.
i
PC Autostart folder contains links to "Tire Tread
Connector" software.
"
Automatic start upon booting the PC.
Robert Bosch GmbH
Entrance Check / Connected Repair | TTM 2104 / TTM 2204 | 57 | en
10.3
1. Select Tire Tread Connector symbol with the right
mouse key.
The context menu opens.
2. Select the "Settings" menu item.
i
Or enter "http://localhost:9090" in the web browser.
Tire Tread Connector registration page is dis-
played.
3. Enter password: ttm#admin
"
Settings" page is displayed.
Configuration
1 691 206 005
|
2019-02-25
Advertisement
Chapters
Table of Contents
