Bluetooth Connection - KBL megaSun 7900 Alpha Operating Instructions Manual

Hide thumbs Also See for megaSun 7900 Alpha:
Table of Contents

Advertisement

plug and pull the cable out of the opening. Then con-
nect the jack plug to the earphone jack of your player.
Then select "MP3 ext." as the audio source from the
interior control panel of the tanning device before
you start playing your own tracks from the player. For
players with bluetooth playback starts automatically.
The tracks can only be selected via the user's own
player. The volume can be controlled via the control
panel of the tanning device and also via the corre-
sponding operating elements provided by the user's
player. Either a headphone or an earphone with a 6.3
mm jack plug can be used. The corresponding con-
nector socket is located next to the line connector.
The audio signal is switched over automatically.
MP3
• Danger of damage to the player due to
overheating.
• Do not place your player within areas that are
directly exposed to UV radiation.
USB INTERFACE
The canopy of your tanning device is equipped with
a USB connector socket. So you can also use a USB
stick to play MP3 audio files. Just plug in your USB
stick, and the tanning device will automatically play
the tracks available on the stick. The MP3 tracks
to be played must not exceed a sampling rate of
320 Kbit/s. KBL AG attaches great importance to
hardware compatibility. Due to the large number of
manufacturers of storage media, however, we cannot
ATTENTION
guarantee a 100 % compatibility. In rare cases, it may
happen that a USB stick is not identified correctly. If
this happens, please use another USB stick.
Make sure not to use any mass memory device
other than a USB stick at this connection (see
table "Technical Data").
USB sticks that are equipped with an integrated
MP3 player have non-standard sector sizes.
We cannot guarantee the proper functioning of
these sticks connected via the USB interface. So
please use the line connection at the head end
of the bench part for this type of device.

Bluetooth connection

To connect an external player (smartphone etc.) wire-
lessly to the tanning device an optional Bluetooth
interface is available.
CONNECT EXTERNAL PLAYER
A Bluetooth connection can be established in
standby and during tanning mode.
O p e r a t i n g I n s t r u c t i o n s | megaSun 7900
α
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Megasun 7900 alpha deluxeMegasun 7900 alpha deluxe hybrid

Table of Contents