KBL megaSun 7900 Alpha Operating Instructions Manual page 21

AUDIO FUNCTIONS
There is a maximum of four audio sources
available at the user's disposal. If you
change over to another source, you must
activate it first. The activation is effected by
pressing the or the
exception of USB audio). All inactive audio
functions are marked with "OFF" on the
interior control panel so that you can easily
recognise the active audio source.
Variable section of the interior control panel
Channel
Studio
This function is used to play the studio music.
If the Studio function has been activated, you can
press the plus and minus buttons to browse through
the channels, provided that more than one channel
is available.
Channel
MP3 internal
This function is used to play the tracks of the internal
MP3 player of the tanning device.
If the MP3 internal function has been activated, press
the plus and minus buttons to browse through the
individual tracks.
S
E
L
button (with the
E
C
T
Tracks
Tracks
MODEL: ACTIVATING AUDIO FUNCTIONS
ACTIVATE
(audio functions)
MP3 external (AUX)
The right-hand side of the tanning devices head end
is equipped with a cable with a 3.5 mm jack plug so
that you can make use of external players, such as
MP3 players, iPods, etc. In this way, you can connect
the headphone jack of your player to the tanning
device. Use the corresponding operating elements
of the external player in order to select the desired
tracks. With the "MP3 external" control element you
have also access to a Bluetooth connected device.
USB-Audio
USB is automatically activated as soon as a storage
medium is connected to the USB port. This USB port
is located above the preSelection control panel.
If you change the audio source later on, please
note that you must re-activate USB before you can
use it again. While USB is active, use the plus and
minus buttons to select individual tracks. With a
USB stick connected, all other audio symbols of the
preSelection menu are inactive.
O p e r a t i n g I n s t r u c t i o n s | megaSun 7900
α
21