Table of Contents
Advertisement
Make sure that you are within the recep-
tion area (about 2 meters).
Make sure that your player is configured
to search for other bluetooth devices.
Should this not be the case, enable blue-
tooth manually. To do so, please read the
instructions for your player.
• Depending on your settings the search will be
performed automatically or manually. All available
Bluetooth devices within reach will be listed after
a short time.
• Among the available tanning devices choose
"megaSun Sound". In the service menu, a trailing
number (01, 02, 03, ...) can be added to tanning
device name.
• If necessary confirm the shown code and connect
again. Not every smart phone asks for a code.
megaSun 01
• A two-time beep indicates that your player is con-
nected to the tanning device.
12
O p e r a t i n g I n s t r u c t i o n s | megaSun 7900
megaSun 01
α
megaSun 01
• Set your player to a medium volume level and
start the music.
• Adjust the volume level on your player.
• During the tanning session, the volume control has
to be done at the tanning device.
DISCONNECT EXTERNAL PLAYER
An existing connection is disconnected automati-
cally after tanning.
The connection is automatically disconnected if the
tanning session is not started within 6 minutes.
COMPATIBILITY OF BLUETOOTH DEVICES
KBL AG attaches great importance to hardware com-
patibility. Due to the large number of manufacturers,
KBL can not guarantee a 100 % compatibility. In rare
cases, it may happen that a bluetooth connection
can not be established.
CORRECTIVE ACTION
Each bluetooth device offers a list of paired devices.
Delete the older entries in this list which have a pro-
file that overlaps with the ones for which you want to
pair your player.
Start the bluetooth device detection again.
megaSun 01
Advertisement
Table of Contents
