Canopy Drive - KBL megaSun 7900 Alpha Operating Instructions Manual

Hide thumbs Also See for megaSun 7900 Alpha:
Table of Contents

Advertisement

FILTER CARTRIDGES IN THE CANOPY PART
Fold down the canopy pane.
Open the lock of the filter insert.
Remove the filter
When installing the
honeycomb grill is directed towards the inside.

Canopy drive

10/13
4
PH2
A lack of maintenance can lead to mal-
functions and damage to the canopy
drive.
• In order to guarantee a trouble-free
operation of the drive the intervals set
in Chapter Maintenance Intervals must
be observed.
Attention
The canopy drive must only be maintained
by qualified and authorised personnel.
insert.
insert
, make sure that the
PH2
19
REPLACING THE SPRING-LOADED WIRE ROPES
(PREPARATION)
Open the bench part.
Disconnect the cable connections of the
audio system (only on right-hand side).
Pay attention to the correct connections
according to the colours ㉖ during the
subsequent assembly.
Close the bench.
Remove the foot panel and undo the cable of
the decorative lighting ㉘.
Solve the front locking screw at the bottom
spacer and remove the side panel -> pull
forward ㉙.
O p e r a t i n g I n s t r u c t i o n s | megaSun 7900
α
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Megasun 7900 alpha deluxeMegasun 7900 alpha deluxe hybrid

Table of Contents