REMOVE SPRINGS AND ROPES
Lifting arm
19
㊱
㊱
Slack the springs using a pipe wrench SW19.
⇒
Remove both springs.
Slightly lift the canopy, remove both securing
㉞
bolts and carefully close the canopy.
Cantilever beam and rope may only be
replaced together.
㉟
Lifting arm
㊲
Determine the position of the cantilever beam
㊲
㊳, measure and write it down.
The position of the cantilever beams must be
the same on both sides!
㊴
Unscrew the lock nut ㊵ of the adjusting
screw ㊶ with a few turns, hold it with a oben-
㊴
ended spanner and unscrew the adjusting
screw completely.
Caution: Cantilever beam and rope may fall.
⇒
Remove cantilever beam and rope.
O p e r a t i n g I n s t r u c t i o n s | megaSun 7900
㊳
2x13
㊵
㊶
α
51