Specifying The Fax Image Quality; Specifying The Image Quality - Konica Minolta bizhub 306 User Manual

3
3.3

Specifying the fax image quality

There are various types of originals to be sent, for example, original in small print, original with accurate draw-
ings, or original with photos. To send a clear original, specify the image quality to fit the original as shown
below.
Contents of original
Text original [TEXT], photo original [PHOTO]
3.3.1

Specifying the image quality

1
Press the Fax key.
The machine switches to the fax mode.
2
Load the original.
3
Press the Quality key.
4
Use the +/, key to select the fax image quality, then press the OK key.
Tips
- If [S-FINE/TEXT] or [S-FINE/PHOTO] is selected, the original may not be sent as specified depending
on destination models. In this case, the original is sent with [FINE/TEXT] or [STD/PHOTO].
- When [FINE/PHOTO] or [S-FINE/PHOTO] is specified, if the original size is larger than the paper of the
destination side, the image quality may degrade depending on the performance of the destination fax
machine.
3-7
Image quality setting
[STD]/[FINE]/[S-FINE]
QUALITY
STD/TEXT
FINE/TEXT
S-FINE/TEXT
STD/PHOTO
Specifying the fax image quality 3.3
bizhub 306/266