Manual Redialing - Konica Minolta bizhub 306 User Manual

3.4 Specifying a destination
Tips
-
A result report is printed out after sending is completed; therefore, you can check whether a fax is sent
to all destinations.
-
To stop sending, press the Clear/Stop key, then select [YES] in the displayed screen. This cancels all
the selected destinations.
-
To cancel the specified-time transmission, press the Function key, then select [CANCEL RESERV.] to
cancel the reservation. For details, refer to page 3-20.
3.4.10

Manual redialing

Redialing means dialing the last fax destination once more.
Tips
-
Manual redialing is not available for group dialing and polling RX.
-
If a password has already been set, set the password again.
1
Load the original.
% For details on how to load the original, refer to page 3-5.
2
When necessary, specify a image quality.
% For details on Quality, refer to page 3-7.
3
Press the Redial/Pause key.
This displays a fax number of the destination that sent the last fax.
4
Press the Start key.
This starts scanning and sending.
bizhub 306/266
3
3-16