Transmission Procedure - Konica Minolta bizhub 306 User Manual

3
3 How to Use the Fax Function
3.1

Transmission procedure

This section explains how to send a fax.
This machine supports the G3 fax function. Its sending and receiving are applicable only to G3-base remote
machines.
1
Press the Fax key.
This changes to the fax mode and displays the fax screen.
2
Load the original.
% For details on how to load the original, refer to page 3-5.
3
When necessary, specify a image quality.
% For details on Quality, refer to page 3-7.
4
Enter a destination fax number.
% For details on how to specify a destination, refer to page 3-8.
5
Press the Start key.
% This starts scanning and sending if the original has been loaded onto the ADF.
After sending is completed, a "long beep" sounds.
% To stop sending, press the Clear/Stop key, then select [YES] in the displayed screen.
% If you load the original on the Original Glass, go to step 6.
3-3
MEMORY
QUALITY:STD/TEXT
OTHER SETTING=,
Transmission procedure
bizhub 306/266
3.1