Primary Messages And Corrective Actions - Konica Minolta bizhub 306 User Manual

9
9 If This Message Appears
9.1

Primary messages and corrective actions

d
Reference
For details on errors and corrective actions when using this machine or the copy function, refer to [User's
Guide Copy].
Message
[Paper jam]
[Open 1st side cover]
[Original doc. jam]
[Open doc. feed cover]
[Paper jam]
[Open duplex cover]
[FRONT COVER OPEN]
[CLOSE FRONT COVER]
[DOCUMENT COVER OPEN]
[CLOSE DOCUMENT COVER]
[DOC.FEED COVER OPEN]
[CLOSE DOC.FEED COVER]
[Toner empty]
[PAPER EMPTY]
[LOAD PAPER (#XXX)]
[PAPER SIZE ERROR]
[RESET PAPER (#XXX)]
[COMMUNICATION ERROR
(####)]
[REDIAL ALL FAILED]
[MEMORY FULL]
[MEMORY FULL]
9-3
Primary messages and corrective actions
Cause
A paper jam occurs in this ma-
chine.
Jammed paper is left in this ma-
chine.
A paper jam occurs in the ADF.
Jammed paper is left in the ADF.
A paper jam has occurred in Au-
tomatic Duplex Unit.
The Front Cover of this machine
is opened, or not set securely.
An original is loaded into the ADF
while the ADF is opened.
The Left Cover of the ADF is
opened.
Toner is depleted.
Cannot copy or print data.
Paper-out occurs in the selected
tray.
"#" indicates a tray, and "XXX"
indicates the paper size.
The paper loaded into the tray
does not match the specified
size."#" indicates a tray, and
"XXX" indicates the paper size.
• A communication has failed
due to an error occurred in
this machine.
• A communication has failed
for certain reasons related to
the fax machine at the desti-
nation.
All attempts to redial failed be-
cause the destination line was
busy or no response was re-
turned.
Image data has caused a memo-
ry overflow during fax transmis-
sion.
Image data has caused a memo-
ry overflow during E-mail trans-
mission.
Correction action
Open the cover at the displayed
position, and remove the
jammed paper.
Open the cover at the displayed
position, and remove the
jammed paper again.
Open the cover at the displayed
position, and remove the
jammed paper.
Open the cover of Automatic
Duplex Unit, and remove the
jammed paper.
Securely close the Front Cover
of this machine.
Securely close the ADF.
Securely close the Left Cover.
Install a new Toner Bottle.
Load paper of the displayed size
into the displayed tray.
Load the appropriate paper into
the tray.
Press any key to print out a send-
ing or receiving result report and
check the details of this error.
Then, select the Utility screen to
re-configure fax communication
settings.
Press any key to check the line
status of the destination, and re-
try the transmission job.
• Remove the received data
that is saved in the memory.
• Transmit a fax using the im-
mediate transmission func-
tion.
Remove the received data that is
saved in the memory.
bizhub 306/266
9.1