Vivotek FD9165-HT User Manual page 367

gettiltangle <integer>
getzoom 0, <positive integer>
getratio <decimal>
getfocus 0, <positive integer>
getminspeedlv 0, <positive integer>
getmaxptspeedlv 0, <positive integer>
getmaxzspeedlv 0, <positive integer>
getmaxfspeedlv 0, <positive integer>
getminpan 0, <positive integer>
getmaxpan 0, <positive integer>
getminpanangle <integer>
getmaxpanangle <integer>
getmintilt 0, <positive integer>
getmaxtilt 0, <positive integer>
getmintiltangle <integer>
getmaxtiltangle <integer>
getminzoom 0, <positive integer>
getmaxzoom 0, <positive integer>
getmaxdzoom 0, <positive integer>
Get the current tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the current zoom position.
Get the current zoom ratio.
Get the current focus position.
Get the minimum speed level of the PTZ control. Normally, the speed
level is '0,' which denotes halting a continuous movement.
Get the maximum speed level of pan/tilt moving.
*Only available when "capability_camctrl_c<0~(n-1)>_buildinpt" > 0
Get the maximum speed level of zoom moving.
Get the maximum speed level of focus moving.
Get the lower limit for pan position.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the upper limit for pan position.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the lower limit for pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the upper limit for pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the lower limit for tilt position.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the upper limit for tilt position.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the lower limit for tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the upper limit for tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the lower limit for zoom position.
Get the upper limit for zoom position.
Get the upper limit for digital zoom position.
VIVOTEK
User's Manual - 367