s<0~(m-1)>_h
20000~"capability_videoin_c<0~(n-1
265_bitrate
)>_h265_maxbitrate"
s<0~(m-1)>_h
framerate,imagequality
265_prioritypoli
cy
s<0~(m-1)>_h
1~"capability_videoin_c<0~(n-1)>_h
265_maxframe
265_maxframerate"
s<0~(m-1)>_h
Available values are listed in "
265_profile
capability_videoin_c<0~(n-1)>_h265
_profile"
s<0~(m-1)>_h
<boolean>
265_smartq_en
able
s<0~(m-1)>_m
cbr, vbr
jpeg_ratecontro
lmode
s<0~(m-1)>_m
1~5,
jpeg_quant
99, 100
"2.0"
4/4
The target bit rate in constant bit rate
mode.
* Only available when h265 is listed in
"capability_videoin_codec".
*
Only valid when "ratecontrolmode"=
cbr
4/4
Set prioritypolicy
* Only available when h265 is listed in
"capability_videoin_codec".
* Only valid when "ratecontrolmode"=
cbr
1/4
The maximum frame rates of a H265
stream at different
resolutions("capability_videoin_c<0~
(n-1)>_resolution") are recorded in
"capability_videoin_c<0~(n-1)>_h26
5_maxframerate"
* Only available when h265 is listed in
"capability_videoin_codec".
1/4
Indicate H265 profiles
* Only available when h265 is listed in
"capability_videoin_codec".
4/4
Enable "Smart Q" function.
* Only available when h265 is listed in
"capability_videoin_codec".
* We support this parameter when the
version number (httpversion) is equal
or greater than 0309a.
cbr: Constant bit rate mode.
4/4
vbr: Fixed quality mode, all frames are
encoded in the same quality.
4/4
* Only valid when "ratecontrolmode"=
vbr.
Set the pre-defined quality level:
VIVOTEK
User's Manual - 199