Vivotek FD9165-HT User Manual page 366

VIVOTEK
* We support this function when the version number of the PTZ control module is equal or
greater than 5.0.0.20.
cam getsetpreset
return <return page>
Syntax: (for querying API)
http://<servername>/cgi-bin/camctrl/camctrl.cgi?[<parameter>] [&<parameter>...]
Example:
http://myserver/cgi-bin/camctrl/camctrl.cgi?getpan
Response:
HTTP/1.0 200 OK\r\n
Cache-control: no-cache\r\n
Pragma: no-cache\r\n
\r\n
pan=4117\r\n
PARAMETER VALUE
getversion <string>
getaction idle,
autopan,
tracking,
tour,
patrol,
getpan 0, <positive integer>
getpanangle <integer>
gettilt 0, <positive integer>
366 - User's Manual
Adds a named preset at current position, and return the preset index.
* We support this function when the version number of the PTZ control
module is equal or greater than 5.0.0.20.
Redirect to the page <return page> after the parameter is assigned.
The <return page> should be the relative path according to the root of
camera. If you omit this parameter, it will redirect to an empty page.
* If the <return page> is invalid path, it will ignore this parameter.
DESCRIPTION
Get the version of the PTZ control module.
Get the current status of the camera.
* We support this parameter when the version number (getversion) is
equal or greater than 5.0.0.12
Get the current pan position.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the current pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the current tilt position.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"